|
Water Testing Kit Water Testing Lab Bottled Water Testing Home Water Quality Household Water Testing Well Water Testing |
Home Water Quality Household Water TestingAuthors: Blake Ross, Extension Specialist, Biological Systems Engineering, Virginia Tech; Kathleen Parrott, Extension Specialist, Housing, Virginia Tech; and Janice Woodard, Retired Extension Specialist, Home Management and Equipment, Virginia Tech. Publication Number 356-482, posted April, 1998 Table of ContentsConcerns about personal and family health may lead you to question the safety of the water used in your household. Perhaps you have been alarmed by recent publicity about water pollution problems and their effect on water used in the home for drinking, cooking, and many other purposes. You may be particularly uncertain about the quality of your household water if you rely on your own well or other private water supply. With the availability of modern water treatment equipment and the aggressive marketing of these devices, you may wonder about the need to install such equipment in your home. Why Test Your WaterThere is no such thing in nature as "pure" water. Nearly all water contains contaminants, even in the absence of pollution-causing activities. Many dissolved minerals, organic compounds, and microorganisms find their way into water supplies as water comes into contact with air and soil. When contaminant levels in water are excessive, they may affect certain household activities and/or be detrimental to human health. Obvious problems, such as staining of plumbing fixtures and laundry, as well as many objectionable tastes and odors, may be evidence of excessive levels of contaminants in your water supply. Many of these impurities are naturally present and are considered a nuisance, presenting no hazard to human health. The presence of most harmful contaminants, however, is not always obvious and such contaminated water may not cause health-related symptoms for many years. As a result, the only way that you can ensure that your water supply is safe is to have a periodic laboratory analysis of your household water. Public/municipal water systems If you rely on a public or municipal water system, this testing is currently being done, the cost of which is included in your water bill. Federal law requires water utilities to regularly monitor and test the water they sell to ensure a safe supply to their customers. The results of any testing are public information and available to you, as a public water user, upon request. Testing and treatment for many nuisance contaminants is voluntary, however, and is not always conducted. You should also keep in mind that testing performed only applies to the water as it leaves the treatment facility and may not reflect the presence of contaminants that enter your water from your plumbing system, for example, from corrosion of household water pipes. It is also important to remember that violations by public water systems are known to occur. Many small communities cannot afford a modern water treatment facility, and only the minimum water treatment standards are met. In addition, some public water systems are old and have not been properly maintained. Private/individual water supplies If you rely on a private water supply, such as an individual backyard well, you are solely responsible for the safety of that supply and any recommended testing. A laboratory analysis of your own water supply will provide you with the information needed to take immediate and long-term corrective measures, if necessary, to provide a suitable and safe water supply. A pattern of timely and regular testing will help you to examine the long-standing quality of your water supply and trends that may alert you to contamination-causing activities. Establishing a record of your household water quality may help you to prove damage and obtain compensation should your water supply become contaminated from some pollution incident. Return to Table of Contents What to Test ForThe list of potential contaminants is very lengthy and impractical to test for in its entirety. Such water testing would be very expensive and unnecessary. In the event that you could have every potential contaminant tested for, relatively few have established standards, or recommended levels, to allow you to evaluate how serious the contamination may be. Knowing which contaminants are most likely to be a problem and being aware of the warning signs of certain contaminants can make such testing more meaningful and less costly. The following tables can be used to select the proper test(s) to confirm a perceived water quality problem and ultimately lead to a solution.
Laboratory Tests for Nuisance Problems Several basic tests not only reveal the severity of specific impurities, but also indicate the likelihood of other contaminants being present. For example, low pH, a measure of the acidity of water, may lead to corrosion of plumbing materials, such as copper and lead, which may dissolve and reach unhealthy levels in drinking water. In addition, high nitrate levels indicate contamination by surface water or seepage which may convey other harmful contaminants, such as pesticides, into household water supplies. For this reason, it is a good idea to conduct routine testing, as often as annually, for the following: total coliform bacteria Tests should be performed during spring or summer, and preferably after a rainy period. In addition, they should be repeated any time work is done on the water supply system, such as well improvements, installing a new pump, etc. When considering the purchase of a new home, at the very least, these tests should be performed on the existing water system. Banks and other lending agencies may require these and/or additional tests before approving a loan. Return to Table of Contents Having Your Water TestedAlthough many companies which sell water treatment equipment offer free tests for a few contaminants such as hardness and iron, this is primarily used as a marketing tool. Any results obtained should be viewed as being preliminary and should be confirmed by an independent water testing laboratory before purchasing any equipment that has been suggested. The choice of laboratories is ever increasing throughout Virginia as numerous private water testing firms are responding to increased demand for such services in recent years. Not all laboratories will be able to conduct all the tests you require and costs of analysis will vary widely. Your local Health Department and Cooperative Extension Offices can provide you with information about water testing labs most accessible to you. The yellow pages of your phone book may also be helpful. Look under the following listings: Laboratories-testing, Water analysis, Water purification, and Water treatment to name a few. Be sure to ask any laboratory you contact for a certification number indicating that it has been approved at the state level. In Virginia, water testing laboratories are certified through the Virginia Division of Consolidated Laboratory Services. Always contact the water testing laboratory beforehand to obtain proper sample containers and specific instructions on where and how to take the sample, as well as how and when to deliver the sample to the laboratory. After receiving the test results, contact the laboratory if you have any problems interpreting the specifics of the report. Again, you can contact your local Health Department and Cooperative Extension Office for assistance in evaluating the significance of your results, and any actions you should take to solve identified problems. Several water testing laboratories across the country promote the use of mail order analysis which may be more convenient for you. Out of state laboratories, while not always certified in Virginia, should be certified in their home state. Keep in mind that, if you choose this alternative, it may be necessary to send a water sample by express mail or overnight courier. The results of tests, such as coliform bacteria, can be significantly altered by a delay between the times of sampling and laboratory analysis. Also becoming more readily available are water testing kits which you can purchase to conduct your own analysis. These will range from the more expensive, multi-test kits which can be used many times to relatively inexpensive, single, onetime tests. Your unique situation will determine what kind of kit you may be able to use. In most cases, your results will not be as accurate or exact as those obtained from a certified water testing laboratory. If you do use a water testing kit, be sure, as always, to obtain assistance in interpreting readings. Obtaining a water analysis is a necessary first step toward understanding the nature and extent of water quality problems. Having your water tested may help you to avoid taking a costly, and possibly ineffective, remedy. At the very least, if your water supply is determined to be safe, you will have peace of mind in knowing that you and your family are not being exposed to dangerous levels of harmful contaminants. Return to Table of Contents For additional information and publications on water quality, contact your local Cooperative Extension office. ---------------------------- |
